Place & Play 32”#
Display#
31.2-inch (16:9 diagonal) non-touch E Ink® electronic paper screen
Portrait view
High visibility and contrast (surface treatment: anti-glare hard-coated front-surface)
180° viewing angle
Resolution: 2560 × 1440 pixels
16-level grayscale
Refresh rate: 750 ms (4-bit full screen) - 100 ms (1-bit partial)
Connectivity#
2.4/5 GHz Wi-Fi (IEEE 802.11 b/g/n) standard, WPA3-PSK, WPA2-PSK and WPA2-EAP support
2.4 GHz Bluetooth 5 support
Power#
Patented ultra-low energy architecture, only 1% of the power used by LCD
Enclosed Micro-USB charging cable
Cordless functionality
High-performance rechargeable Lithium-Polymer 10,800 mAh battery (2x LP578499-PCM-LD; 5,400 mAh @ 3.7V) . Up to 12 months of autonomy on a single battery charge. 10 hours charging time with a Micro-USB charger (output rating of 5 V, 1 A).
CAUTION. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Dimensions & weight#
Place & Play 32” dimensions (H/W/D): 27.84 × 16.29 × 0.53 in (707.2 x 413.8 x 13.5 mm)
Weight of Place & Play 32”: 11 lb 4 oz (5.1 kg)
Casing#
High-quality anodized aluminum casing, milled from a single block of aerospace-grade alloy
Anti-reflective, high transmissive glass
Color: Black, Gray
Mounting#
7.87 x 7.87 in (200 x 200 mm) VESA mount compliant
Devices can be mounted at a maximum height of 2m
NOTE: Make sure the VESA mount can support the device mass, as stated in the specifications.
Environmental conditions#
Operating and storage temperature range: 32°F to 113°F (0°C to +45°C)
During charging, the temperature should not exceed 113°F (45°C)
Indoor use only
Software & License#
A license is needed for every device.
One month of free Signage license is included with every device purchased.
What’s in the box#
The box includes:
Place & Play 32” device
1 x Micro USB cable for configuration and charging
Quick start guide
Warranty#
1 year